Product performance of Dongying epoxy red lead anti-rust paint manufacturer
Component A consists of epoxy resin, red lead, new anti-rust pigment fillers, additives, solvents, etc. Component B is an amine curing agent.
Excellent rust resistance, water resistance and moisture resistance.
It has good wettability, sealing, heat resistance and topcoat matching properties for metal surfaces.
Good physical and mechanical properties.
Scope of application
Applicable to ships, containers, bridges, port machinery, marine mine steel structures, etc.
Physical parameters
Color orange
Glossy and matte
Theoretical coating rate primer/㎡ (based on dry film, excluding loss)
Specific gravity is about
Flash point Part A Component ℃
Drying time ℃ Surface dry and fully cured
Construction instructions
Mixing ratio Part A (paint) Part B (curing agent) (weight ratio )
Curing time ℃ minutes
Construction life (℃) hours
Thinner Epoxy thinner
Dilution amount ~ %
Construction method brushing, roller coating or none air spray.
Nozzle hole.
Spray pressure/
Tool cleaning epoxy thinner
Overcoating time
Substrate temperature
℃
℃
℃
Paint film thickness wet film and dry film.
Surface treatment Steel surface treatment is performed as per. Shot blasting or sandblasting to level . or manual and power tool rust removal to level . The surface after rust removal should be free of oil and dust before painting. And paint it immediately to avoid secondary rust.
Construction conditions: The relative humidity is below %, and the surface temperature of the substrate is above the dew point by ℃. When the temperature of the construction substrate is lower than ℃, construction cannot be carried out.
The back-end supporting coatings include anticorrosive coating topcoat, chlorinated rubber topcoat, acrylic polyurethane topcoat, and high chlorinated polyethylene anticorrosive coating topcoat.
Packaging specifications: paint (component A), liter container (kg), curing agent (component B), liter container (kg).
This product should be stored in a cool, dry and ventilated indoor warehouse. The storage period at room temperature is one year.
Pay attention to ventilation at the construction site, strictly prohibit fireworks, and keep away from open flames, heat sources, and oxidants. Paint construction workers should wear protective equipment during construction to avoid long-term inhalation of solvent vapor or paint mist to prevent damage to the skin and eyes. Wash skin with soapy water immediately, and rinse eyes thoroughly with water immediately. If you swallow it by mistake, induce vomiting with warm water and then seek medical examination.
Qingdao Baiwei Paint Co., Ltd.
Qingdao Runmeijia Anticorrosive Coating Co., Ltd.
Sales Manager Liu Changjiang
Mobile phone
Landline
Email@
Address: Ankang Road, Huangshan Economic Zone, Wangtai, Huangdao District, Qingdao
Dongying epoxy red lead anti-rust paint manufacturer