Dongying Epoxy Resin Floor Paint Construction Company's product composition consists of epoxy resin, pigments and fillers, reactive diluents, various additives, modified amine curing agents, etc.
Product Features
The surface is smooth, beautiful and achieves the perfect surface effect.
Strong adhesion, impact resistance, heavy pressure resistance, wear resistance, dustproof and moisture-proof.
Resistant to water, acid, alkali, salt, chemical solvents and oil corrosion, especially strong alkali resistance.
Scope of application
Microelectronics industry that requires high cleanliness, sterility, dust-free, beautiful appearance, pharmaceutical industry that implements standards, and blood products industry that requires wear resistance, impact resistance, heavy pressure resistance, and chemical corrosion resistance Workshops, warehouses and other industries, it can also be used on floors in offices, schools, homes, etc.
Physical parameters
Various colors
Glossy matte to glossy
Surface drying time
Standard thickness
Specific gravity of primer, intermediate paint, approx.~.topcoat about..
Construction Instructions
Primer Application
Mix the high-penetration epoxy primer and matching curing agent and accelerator in proportion and stir evenly with a hand-held electric drill. Pour the material onto the base surface and scrape it flat with a rubber scraper or plastic scraper. Make sure there is no leakage so that the base material can penetrate into the cement base layer. Primer maintenance time is hours.
Application of the intermediate coating
Stir the intermediate paint, sand (), powder (), curing agent, and accelerator according to the ratio of paint/powder to/~ until it becomes a slurry, use a trowel to The clay is spread on the surface of the base layer. It is required to apply evenly and smoothly without any leakage. Need to be criticized twice.
Apply self-leveling flat paint
Mix the fabric and matching curing agent evenly in an appropriate proportion, pour the material onto the base surface, and scrape it flat with a toothed trowel according to the thickness required by the design, because the effective time of use of the material is Approximately 10 minutes, each application should be applied continuously and quickly. It is required that no coating is missed and the surface of the surface layer is smooth and flat without obvious defects.
After the construction is completed, it will take about a day to maintain. If the customer needs, waxing can be used to protect the surface.
Construction Points
During construction, the on-site environmental conditions are suitable for the construction temperature to be above ℃, and the relative humidity should be lower than %. Try to choose the period from construction to the complete hardening of the paint film. The relationship between doors and windows, gaps and ventilation should be Seal it with protective tape to prevent dust from blowing into the processing area.
In summer, insects are very sensitive to color, especially before the application is hardened. Insecticides should be sprayed before construction.
In order to prevent contamination of the construction edge and maintain a completely straight line at the processed area or the boundary with the uncoated part, protective tape should be affixed.
Cross construction and irrelevant personnel are strictly prohibited from entering the construction site. Materials transported to the construction site must be placed in a place that is protected from wind, rain and direct sunlight. And take complete fire prevention measures.
Pay attention to ventilation at the construction site, strictly prohibit fireworks, and keep away from open flames, heat sources, and oxidants. Paint construction workers should wear protective equipment during construction to avoid long-term inhalation of solvent vapor or paint mist to prevent damage to the skin and eyes. Wash skin with soapy water immediately, and rinse eyes thoroughly with water immediately. If you swallow it by mistake, induce vomiting with warm water and then seek medical examination.
Qingdao Baiwei Paint Co., Ltd.
Qingdao Runmeijia Anticorrosive Coating Co., Ltd.
Sales Manager Liu Changjiang
Mobile phone
Landline
Email@
Address: Ankang Road, Huangshan Economic Zone, Wangtai, Huangdao District, Qingdao
Dongying Epoxy Resin Floor Paint Construction Company